Bath Rust Repair at Your Home

Bath Repair Services removes rust from steel and cast-iron baths and restores the enamel finish in your home, from £240.

Can Rust on a Bath Be Repaired?

Yes, as long as the metal underneath is still solid. Rust on a bath almost always starts where the enamel has chipped or worn through. Bath Repair Services removes the rust damage and restores a smooth, enamel-like finish over the area, matched to the colour of the bath. The bath is not taken out.

A bath that has rusted through is a different case. Once there is a hole, or the steel around the waste has thinned so far that it flexes, the repair is more involved; hole repairs are possible in some cases, and a photo lets us tell you which yours is. Orange staining under a dripping tap is something else again: that is usually a stain on sound enamel, and it often cleans off.

Bath Repair Services is an independent, local business. We are not part of any national chain or franchise, and we are not connected to any other bath repair company or website. Your quote request on this page comes straight to us.

What Causes Rust on a Bath?

Steel and cast-iron baths are protected by a layer of enamel, and they only rust where that layer is broken. A chip from a dropped bottle is the usual starting point. Around the waste and the overflow, years of standing water and cleaning wear the enamel thin, which is why so much rust appears there first, and the rim suffers where a bath mat or a shower screen keeps it damp.

Rust does not stay the size of the chip. It creeps under the enamel next to it and lifts it, so the patch grows. Acrylic baths do not rust at all: a brown mark on an acrylic bath is a stain, or it comes from a metal fitting.

How We Repair Rust on a Bath

Everything is done in your bathroom, with the bath, taps and panel in place and the area around the bath protected. The rust damage is removed first, because finishing over live rust only hides it for a while. The area is then restored to a smooth, enamel-like surface in the colour of your bath.

You pay once the repair is complete and you are happy with it. If rust keeps coming back after touch-up paint or a DIY kit, that is usually the reason: the rust underneath was never removed.

Bath Rust Repair Cost

Rust repairs on a bath start from £240. The final price depends on how far the rust has spread under the enamel and on the repair method needed to make the repair last. We do not add VAT on top of our prices, and there is no extra charge for travel unless it cannot be avoided: we plan jobs by area to keep costs down.

When rust shows in several places, or the enamel is worn and dull all over, a full resurface from £415 deals with the rust and gives the whole bath a new surface in one job. That is still usually much cheaper than replacing a steel or cast-iron bath.

Warranty on Rust Repairs

Rust repairs come with a 12-month warranty certificate, and a full re-enamel with a 5-year warranty covering flaking or cracking of the new surface. We are fully insured, with public liability and trade insurance.

Bath Repair

Ideal for cracks in acrylic, plastic, or composite baths, as well as rust damage in steel or cast iron baths.
Our bath repair restores strength, appearance, and durability without replacing the bath.

Shower Tray Repair

Perfect for chips and cracks in enamel, acrylic, plastic, or stone resin shower trays.
We repair and seal the surface to prevent leaks and restore a smooth, long-lasting finish.

Sink Repair

From chips and cracks to worn surfaces, our sink repair service restores your sink to a clean, smooth, like-new finish, extending its lifespan and appearance.

Brands

Simple examples of some prestigious brands with which we have extensive experience working on their products

Why Bath Repair Services?

Bath Repair Services

You will look at the repair every day, so it needs to be done to the highest standard. A simple patch repair is sometimes an option, but our spot repairs mean:

  • No blue or greenish spots that look like stains.
  • No bumps in shower tray repairs.
  • The chip or crack is no longer visible and does not come back.
  • Strong bonding chemicals, so the repair holds permanently.

Every repair and resurface is done in situ (in your home). There is no need to remove the bath panel or taps, and everything is protected, including your floor. We are clean and punctual, we do not add VAT on top of our prices, and an invoice with warranties is always included.

Areas We Cover

We repair rust on baths across the South West and South Wales. See the page for your area: Bristol, Bath, Swindon, Gloucester, Cardiff and Newport, Exeter and the rest of Devon.

Request a Bath Rust Repair Quote

Send a photo of the rust and we will send you a price

Before and after: recent repairs

Photos from recent jobs. Every repair is done in your home, without removing the bath, shower tray or basin.

Rust repaired on the rim of a bath

Rust on the rim of a bath, before repair
Before
The same bath rim after the rust repair
After

Rust Repaired Around The Plughole Of A Bath

Rust around the plughole of a bath, before repair
Before
The same plughole after the rust repair
After

Frequently Asked Questions About Bath Rust Repair

Can you repair rust around the plughole of a bath?

Yes. The area around the waste is where rust shows most often, because water stands there and the enamel wears thin. We remove the rust damage and restore the finish around the waste with the bath in place. If the metal has rusted right through, send a photo so we can check whether a repair will hold.

Will the rust come back after the repair?

Rust returns when it is covered instead of removed. Our repair removes the rust damage before the surface is restored, and it comes with a 12-month warranty certificate. Keeping the area dry helps as well: fix a dripping tap and do not leave a wet bath mat on the enamel.

Is a rusty bath worth repairing?

In most cases it is. A steel or cast-iron bath with one or two rust spots is otherwise sound, and a repair from £240 is usually much cheaper than replacing the bath and making good the tiles around it. When rust and wear are spread over the whole bath, a full resurface is the better choice.

Can I treat rust on my bath myself?

A rust stain on sound enamel can often be cleaned off. Rust that comes from a chip is different: touch-up paint over it looks better for a while, but the rust carries on underneath and the paint lifts. Our customers who tried repair kits first mostly found that the colour did not match and the patch soon peeled.

Do you repair rust on cast-iron baths?

Yes. We repair rust on both steel and cast-iron baths in your home. When an old cast-iron bath is worn all over, it can also be fully re-enamelled without removing it, with a 5-year warranty on the new surface.

Get quote

To get started with your initial consultation, we kindly ask you to fill out the form and include some photos of the item in question ( can be done via phone ).

Bath Repair Services is an independent, local business: your quote request comes straight to us.

Up to 5 images accepted, upload image of repair (.jpg, .png, .pdf files only, up to 5MB)

FAQ

ask us anything

Cost-wise it’s usually much cheaper than buying new like refinishing a bathtub can be up to 75% less expensive and you avoid disposal fees that come with replacing items.

Restoring keeps unique or sentimental value intact while making them look and work better also for antiques or vintage items restoration helps preserve their historical beauty.

We really think you’ll find it worthwhile.

 

Absolutely, we understand the need for flexibility and are happy to accommodate weekend appointments whenever possible. However, availability during weekends is subject to confirmation at the quote stage.

Once we discuss your specific requirements, we can provide a more definitive answer regarding our weekend scheduling.

Please feel free to reach out with any further questions.

Bath, Shower & Sink Re Enamelling & Resurfacing comes with a 5 Year Warranty & Guarantee covering flaking or cracking of the new enamel surface

Bath, Shower & Sink Chip, Crack, Rust and Hole Repairs come with a 12-month warranty certificate.

Certainly, our bath crack repair or bath chip repair services are designed to seamlessly match the existing color of your bath enamel. We take great care to ensure the repaired area blends perfectly with the surrounding surface.

Additionally, we offer a satisfaction warranty and you only pay once the repair is complete and you are fully happy with the results. Your satisfaction is our top priority.

Newly enamelled bath typically lasts 10-15 years, and with proper maintenance and cleaning, it may even last up to 20 years.

 

You can use a regular spray cleaner on your bath, shower, or sink and wipe it down with a cloth or sponge.

Avoid anything too abrasive. We also recommend avoiding bleach because it can dull the shine over time.

If you need to tackle limescale, those removers are safe to use without causing any damage.

Yes, we are fully insured.
We hold both public liability and trade insurance to ensure complete coverage and peace of mind for our clients.

It’s working fairly decently in some cases; however, most of our clients find it to be quite disappointing. Although they follow the instructions carefully, the final result often looks uneven and doesn’t match the existing color.

Unfortunately, the bath repair kit don’t seem to last long, with patched areas beginning to peel within just a few weeks.

Bath enamel re-spray( complete resurface of bath ) will take up to 1 whole day ( 6-10 hours) which will be done in your place, there is no need to take off tap or side panel ( if exist ) our technician will cover the sprayed area so when is done, you will have brand new looking bath.

 

For Bath Chip Repair or Bath Crack Repair it can take up to 4 hours, depending on difficulty of the repair.